DIY Dog Crate Furniture Instructions | POPSUGAR Home

Oct 14, 2024

Disclaimer: I am a serious pet parent. I've wanted a baby Golden Retriever for years, so when the time finally came to start "nesting" before my furry baby would be coming home, I really invested myself into it. And that included some heavy-duty DIY.

The crown jewel in my living room is the crate for my pup that looks like furniture — what I like to call dog crate furniture. I get endless compliments on it, and you'll almost never notice that the inside is just a standard dog crate. I live and die by a clean, polished aesthetic, and while I had every intention of crate-training my pup, I didn't want my living room to have a black wire dog prison as its centerpiece . . . so I decided to make my own dog crate furniture.

Better-looking crates — ones that look like furniture — exist for purchase out there in the world, but they are typically less sturdy and definitely not chew-proof. They're also absurdly expensive, and I wasn't looking to drop $500 (or more!) on something that might be chewed apart within minutes of putting it to use.

After an embarrassingly extensive amount of unfruitful research, a little light bulb went off: I could create my own medium dog crate! All I'd have to do is get the wire crate and build a simple frame and lid around it to give it a furniture aesthetic and tabletop functionality.

I promptly called my dad — a retired construction exec and Home Depot frequent flier with a Tim Allen-status toolshed — and asked if he thought it would be doable, and if so, if it'd be affordable. A few screenshots and specs later, and we were meeting up at the hallowed halls of hardware, orange aprons, and sawdust.

Aside from being infinitely more aesthetically pleasing than the standard medium dog crate, this is a safe choice for your dog. The crate goes inside the wood frame, so the puppy never gets a chance to chew up the wood while they're teething. Paint can sometimes be toxic to dogs, and you don't want splinters getting lodged in their little gums, so this is a way for you to get the look you want while still protecting your pup.

Additionally, this serves as a more functional piece of convertible furniture than a crate (while taking up the same amount of space in your home), making it great for storage, decor, and lighting. It also adds more of a den-like quality to the crate so your dog can feel safer and cozier when they camp out inside.

This is a frame construction; there is no bottom piece, and the wire crate is not attached to the "furniture" in any way. You're building a basic frame and a lid, so it's very simple and one of the least complicated furniture DIYs you'll ever try.

We decided to make the entire piece from melamine that my local Home Depot had in stock. This saved us from having to (1) buy paint and (2) use paint, therefore saving time and money. Melamine is also cheaper than wood, so there was even more money saved. You don't have to use melamine — especially if you're looking to make your furniture piece a different color — but if you're into plain white and a good bargain, then boy do I have the materials for you!

Also, a heads-up: you'll need to have the melamine pieces cut. As in, sawed. If you don't have a saw and don't have any desire to use a saw, then fantastic! Me either. You can have the friendly folks at your hardware store make cuts so you can take home the perfectly sized pieces for your project.

Aside from the melamine, we used the following:

The sizing of the wood pieces will depend on the specs of your crate. I opted for a 36-inch crate, which was the average size for a fully grown female Golden Retriever (joke's on me if she outgrows this). Keep in mind that when you get a puppy, you can partition the larger crate (most crates come with one!) to make them feel more snug and secure in a smaller space, and then move the partition as your pup grows. If you want to get the most time out of your furniture piece, I'd strongly recommend getting the largest crate necessary for your pup's expected adult size — then you never have to make another one!

Here are the sizes of the pieces we bought:

This took roughly six hours to put together, broken up into two days. The out-of-pocket cost for the melamine materials was about $100. I scored the crate on mega sale at PetSmart for about $25. There are plenty of bargains for inexpensive but well-rated crates on Amazon, too. Keep reading for the instructions.

1. Build the Corner Posts

For each corner of your crate, you'll need to create a two-sided, corner-shaped post — they're each made of one 28x2.5-inch piece (side A) and one 28x1.5-inch piece (side B), drilled together to create a 2.5-inch by 2.25-inch L-shape at a 90-degree angle.

Drill the pieces together like so, at the top, middle, and bottom. You'll eventually cover the top of the screw with a little sticker patch.

2. Attach Front-Side Top and Bottom Beams

For this step, you'll need two 38x2.5-inch pieces. Attach one to the top of the front (long) side and one to the bottom, with two drills on each corner.

3. Attach Back-Side Top and Bottom Beams

This piece is identical to step two. Build it using the same dimensions.

4. The Sides

Once you have the front and back set up, connect them with the side beams (the 26x2.5-inch pieces), attached to the top and bottom with two screws on each corner.

5. Make the Top

I opted to give this piece a removable "lid" top so I could take the wire crate out for traveling, cleaning, and repositioning when necessary — this has proved to be a seriously solid decision.

The lid is one solid piece of melamine at 42x29 inches, with white taping around the edges (I'll get to that in step six). We applied two small blocks of wood underneath with gorilla glue (you can use wood glue as well) to stabilize the lid from sliding. The wood blocks are positioned on the long sides, set to fit on the inside of the top framework.

6. Finishing Touches

To finish up, I used the aforementioned white melamine tape to cover raw and unfinished edges and dot stickers to cover the holes and screws. You can get this at the hardware store and use a clothes iron to melt it on.

Little baby girl has loved her new "den" — and I had her crate-trained at night within the first month of bringing her home (a frozen peanut-butter-stuffed Kong definitely helped with this). The piece also serves as a console table for my favorite seashell lamp, a photo of my puppy and me, my Golden Retriever books, and a handful of pup things I like to have on hand and accessible. Plus, knowing that I made this myself (with my dad!) makes it extra meaningful and a cherished piece in my home.

Dominique Michelle Astorino is a former PS contributor.